1.30.0.26 -Ordnance not contacting specfic bridges properly

[eko13wf]

There is a very specfiic issue with arched road surface bridges on certain tiles. The railroad tracks must be on the east side while the river is going north/south on that tile.

Grenades, mortars, rifle grenades, smoke grenades can all clip through the top bridge surface and sometimes fall straight through the bottom into the river doing no damage.

Specific bridges I found that did this were in Anhee and Thionville.

The arched road surface bridges on east/west rivers have no problem. The same bridge type on north/south rivers where the railroad tracks are on the west side do NOT have this problem.

Straight road surface bridges had no issues.

[tettie]

Can you put some pics with this?

[GOPHUR]

Hmm.

I'm a little tired today so forgive me but I can't seem to figure that out. The arched bridge is a single object rotated to match the orientation of the tile it is on. It has no relation to what another bridge on a different tile is doing (one tile, one bridge).

I'll try the bridges at Anhee and see if I can replicate. BRB.

[x15]

I hate to be pushy, or interrupt your flow, Gophur, but you might want to look at the font issue and fix the patch.

[GOPHUR]

Ok I see it. Seems to be a collision issue with STOs. I'll check some other bridges.

[GOPHUR]

Ticketed.

They are going off, just under the surface of the bridge.

[GOPHUR]

Sent this to internal test. FIXED.