GLOBAL.CALIB file is totally wacked

[Khsolo]

0x80000000,1.500000,0.900000

0x80000001,1.500000,0.900000

It only shows straight lines and if you try to change it its completely messes up the curves and dots and everything

[Khsolo]

This is what happens when you try and change something

http://img202.imageshack.us/img202/8643/nuevaimagenpu.jpg' alt='nuevaimagenpu.jpg'> Uploaded with ImageShack.us

[Khsolo]

This is bad

[noons]

same but only noticing it on Y axis, other axis seem ok to me

[Khsolo]

same but only noticing it on Y axis' date=' other axis seem ok to me[/quote']

Its random and it changes back and forth, its completelly wacked

Also trimming axis doesnt work which is bad bad bad for flying <----

[GOPHUR]

The coders will want more detail. None of us ever messes around in there.

Ticketed.

[GOPHUR]

Mine working fine. What's your setup?

Did you try deleting the file and starting over?

[Khsolo]

Mine working fine. What's your setup?

Did you try deleting the file and starting over?

Yes i did

Try adjusting your calibration curves, go to the game and then come back and check how they look, they looked like the one i posted

Also tried applying old calibration files and they kept erasing everything and only leaving the 2 first lines

What extra information you need?

[Khsolo]

Try this, delete your global.calib file

Start offline mode

Go to controllers and change your x axis to a little over the middle or whatever you want

Press the back button

Then go back to controllers are select your x axis again

It will look completely different than the curve you selected

[noons]

I think it doesn't like the old global calib file but once you have that you can copy and past the other cfml files across.

Edited November 9, 2011 by noons

[Khsolo]

I think it doesn't like the old global calib file but once you have that you can cut and past the other files across.

It doesnt work

I deleted the whole cfml folder, it created a new one with a new global.calib

Then happened what i posted above

[GOPHUR]

Roger that.

Test 1

• launch offline
  
• goto controllers
  
• change setting for J1 x-axis
  
• go back
  
• goto controllers
  
• see J1 x-ais is fubar
  

Now the question is is it just visual or is it actually affecting the controller.

Ticketed.

[noons]

My actual steps were:

Delete the CFML folder.

Log in to Offline and create a couple of basic air changes such as throttle and engine pitch.

Log out. Copy in remainder of CFML files into CFML folder and replace air.cfml file.

Log back in and working perfect for me.

[Khsolo]

Roger that.

Test 1

• launch offline

• goto controllers

• change setting for J1 x-axis

• go back

• goto controllers

• see J1 x-ais is fubar

Now the question is is it just visual or is it actually affecting the controller.

Ticketed.

Go to the global.calib file and read the numbers

They are furbar imo

[GOPHUR]

Wouldn't do me any good KH. I don't know what they are supposed to look look like. Over my head.

[Khsolo]

Wouldn't do me any good KH. I don't know what they are supposed to look look like. Over my head.

They should look like this

0x81000000,0.022588,0.432236,0.660000,0.950000

0x81000005,0.000000,0.484941,0.460000,0.950000

0x81000001,0.022588,0.741882,0.360000,0.987647

And instead they look like this

0x80000000,0.980486,0.646991

0x80000001,0.980486,0.646991

See the missing spaces to the right?

Also it doesnt record more than 2 axis thats why there is only 2 lines

[noons]

mine looks like this now khsolso

x80000000,1.500000,0.9000000x80000001,1.500000,0.900000

old one is

0x80000000,1.021739,0.9000000x80000001,1.021739,0.9000000x81000001,1.000000,1.00000,1.000000,1.000000

Edited November 9, 2011 by noons

[Khsolo]

mine looks like this now khsolso

x80000000,1.500000,0.9000000x80000001,1.500000,0.900000

old one is

0x80000000,1.021739,0.9000000x80000001,1.021739,0.9000000x81000001,1.000000,1.00000,1.000000,1.000000

That means its screwed

Use wordpad to open it instead of notepad and it will look like mine

[Khsolo]

And i know what im talking about

http://forums.battlegroundeurope.com/showthread.php?t=335171

[blackshark]

so whats the fix?

Yaxis is screwd, i change it in game to what it should be and it reverts to a random setting.

[noons]

Hopefully its an easy fix for the programmers.

[Redwing]

rudder inputs wacky, no soft adjustments will only kick in full left rudder, no right at all

[Khsolo]

Probably because of this:

http://forums.battlegroundeurope.com/showthread.php?t=379077

[dkamerad]

Controller settings are also changing themselves mid flight without changing any settings!

_oRj7-_HKJQ

Timeline

0s: Controller input is hosed on the X axis only.

7s: open controller settings and set around what I would otherwise use (5% deadband, flat curve).

Execute some brief tests make sure everything kosher, no problems.

18s: Open up controller tab, oop, X axis has shifted! What happens though is I lose the ability to roll right at all. Normally that deadband is an "In each direction from center" cutoff, but it completely removed my ability to roll right at all.

24s: Contuing on, even weirder. Both directions of the X axis cause me to roll in the same direction.

Edit 2: Should mention here, that the third phase at 24s occurred without opening the settings.

Edited November 9, 2011 by dkamerad

[hotrod]

i got the same thing going on, guess im just gonna have to wait till its fixed